SKT-560G Surface glue ceiling filter These filters are backed with imported PE or common non-flammable net scrim. The series of ceiling filters are mainly used in advanced industries such as car painting, Hi-tech electronics, aerospace and other military areas etc. The outlet side of the filter media is reinforced by imported PE net and fire-retardant net. High flame resistance, high dust holding capacity, low initial resistance, safe and reliable. Composited of imported high-performance, break-resistant synthetic fiber in gradual technology; Due to complete penetration of viscosity in media, dust particles can not pass. Fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results. This series is the economic development of the ceiling filters, we use the longer hot melt anti-broken synthetic fiber and high quality water resin for this series. Application: capturing 1-10μm particles, especially for the top part of spray booth, prefiltration mesh to reinforce through air filter system, diffluent equally Type: supply pads or rolls size Media: synthetic fiber with gradual density, the inlet side attached glassfiber mesh or PP fabric for support, surface of inlet side with adhesive treatment ModelSKT-560GSKT-520G Weight:450gr/m2420gr/m2 Thickness:20mm20mm Air Flow Rate:936m3/h970m3/h Initial Resistance:23pa22pa Final Resistance:400pa400pa Medium Arrestance:93.10%92.50% Air Velocity:0.26m/s0.27m/s Dust Holding:385gr/m2365gr/m2 Max Temperature:1200C1200C Filtration Class:F-5(DIN 24185)F-5(DIN 24185) Flame Resistance:F-1(DIN 53438)F-1(DIN 53438) Filter Media manufacturers website:http://www.sktfilter.com/filter-media/ |